<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2900.2627" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>I experienced a new low today. I did a = bunch of work on a 6' Hyundai action (10 yo) and was set to do a bench = regulation. Using my pre-measured string heights, I found that I obviously made a gross = mistake with my measurement somehow. So I drove the 40 miles back to the piano = and re-measured - my original measurements were correct. The hammers on this = thing were bored to produce a full quarter-inch overstrike.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>What are the correct words here - this = is amazing - did they build all their pianos this way? Don't they just have some jig = in the factory where all hammers for this model are drilled the same way? Did somebody's finger get in there and jacked the jig up a quarter inch?</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Has anyone ever seen anything like = this? Maybe I just haven't been around long enough!</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Terry = Farrell</FONT></DIV></BODY></HTML>