<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1276" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I haven't found any PSI specs on copper =
either
but I'm sure a local commercial plumbing supply can tell you. =
I have
a vertical compressor that maxes out at 135 and the piston pump =
transfers the
air to the tank via a piece of 1/2" soft copper so I guess copper is =
okay.
Let us know if you find any specific data.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Rob Goodale, RPT</FONT></DIV>
<DIV><FONT face=Arial size=2>Las Vegas, NV</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=cmpiano@comcast.net =
href="mailto:cmpiano@comcast.net">Carl Meyer</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">Pianotech</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, March 18, 2004 =
5:59
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Journal Artical - =
BAD
IDEA!</DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Here's my beef! I haven't been =
able to get
pressure rating anywhere. I spent an hour on the net and looked =
at
McMaster Carr etc. Lotsa rhetoric but no specs. I'm sure =
the
rating depends on the diameter.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I give up. Guess I'll just go =
with 1/2 inch
blue and hope it works. </FONT></DIV></BLOCKQUOTE></BODY></HTML>