<DIV>Dave,</DIV>
<DIV>Can you use denatured (wood) alcohol for this application? Thanks.</DIV>
<DIV>&nbsp;</DIV>
<DIV>Clyde Allen, Assoc.</DIV>
<DIV>Silver Spring, MD<BR><BR><B><I>Dave Nereson &lt;davner@kaosol.net&gt;</I></B> wrote:</DIV>
<BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">Went to tune a lady's Baldwin spinet (not Acrosonic, but doesn't <BR>matter) and after hitting the soft pedal, most of the hammers drifted back <BR>very slowly. It had changed climates and the action centers were sluggish. <BR>I've encountered this many times before.<BR>But what I don't get is: why is it almost always remedied by shrinking <BR>only the hammer-butt center-pin bushings? Don't all the other center pin <BR>bushings swell as well (or flanges shrink, whatever the case may be)?<BR>I applied about 1:4 alcohol to water to all the hammer flange bushings, <BR>let it dry, and that freed them up pretty well, as it usually does. Still <BR>had to re-pin a few. But why aren't all the jacks, wippens, and dampers <BR>sluggish also?<BR>--David Nereson, RPT <BR><BR><BR>_______________________________________________<BR>pianotech list info:
 https://www.moypiano.com/resources/#archives<BR></BLOCKQUOTE><p>__________________________________________________<br>Do You Yahoo!?<br>Tired of spam?  Yahoo! Mail has the best spam protection around <br>http://mail.yahoo.com