<html>
<body>
Kevin,<br>
<x-tab>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</x-tab>Thanks for
your concern. I observed at least half the backcheck leather was
crumbling off and some stuck into these very deep checkering grooves. I
did not change the angle but only removed the deep grooves and it
regulated and plays very well with positive checking at all dynamic
levels, thank you very much. <br>
<x-tab>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</x-tab>These
damper levers with flanges are all wood , not ABS. This piano is roughly
10 yrs. old.<br><br>
Greg<br><br>
<br>
At 12:10 AM 2/24/2003, you wrote:<br><br>
<blockquote type=cite class=cite cite><font face="arial" size=2>&nbsp;&nbsp;&nbsp;
And another BTW, I'd really wait until you hear from Don Mannino on this,
before you do anything. I've worked on quite a few GE-1s and I've never
seen anything like what you're telling us. Their tails are not so rough
as to need attention. Are you sure you're not talking about a
Samick?</font><br>
<font face="arial" size=2>&nbsp;&nbsp;&nbsp;&nbsp; Kawai, long ago,
understood the principle of &quot;opposing arch's&quot; of movement
enough to know that you don't need that kind of aggressive
checkering.</font><br>
<font face="arial" size=2>&nbsp;&nbsp;&nbsp; And what the heck happened
to the flanges? They're ABS! We have no problems with them,
EVER!</font><br>

<dl>
<dd>----- Original Message ----- <br>

<dd>From:</b> <a href="mailto:gnewell@ameritech.net">Greg Newell</a>
<br>

<dd>To:</b> <a href="mailto:pianotech@ptg.org">pianotech@ptg.org</a> ; <a href="mailto:MPT@philbondi.com">MPT@philbondi.com</a> <br>

<dd>Sent:</b> Sunday, February 23, 2003 9:44 PM<br>

<dd>Subject:</b> Kawai parts<br><br>

<dd>Greetings lists,<br>

<dd>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; I have recently experienced something most puzzling. I ordered new <br>

<dd>damper levers straight from Kawai for a GE-1 played and used heavily by a <br>

<dd>&quot;spirited&quot; church. Is that the politically correct term we use today? <br>

<dd>Anyway, They were to be replaced because somewhere along the line the leads <br>

<dd>in more than a few had fallen out and were missing! The tray blocks and <br>

<dd>flanges also needed replacing as well as hammer re-shaping, tail reshaping <br>

<dd>and a regulation. Now what puzzles me is two fold, 1) why did the <br>

<dd>replacement parts Kawai sent me have most of there leads fallen out in the <br>

<dd>zip lock bag by the time they got to me, and 2) why is the &quot;checkering&quot; of <br>

<dd>the hammer tails done so aggressively as to gouge the backcheck leather? <br>

<dd>The later is not specific to Kawai as I've noticed it on quite a few other <br>

<dd>piano. Mostly cheaper brands which I don't often associate Kawai as being <br>

<dd>one of. I'm sure many of you have run across leads falling out but have you <br>

<dd>ever had the new replacements shipped to you with leads falling out?<br><br>

<dd>Greg Newell<br>

<dd><a href="mailto:gnewell@ameritech.net">mailto:gnewell@ameritech.net</a> <br><br>
<hr>

<dd>_______________________________________________<br>

<dd>pianotech list info: <a href="https://www.moypiano.com/resources/#archives">https://www.moypiano.com/resources/#archives</a><br><br>

</dl><br>
---<br><br>
Checked by AVG anti-virus system (<a href="http://www.grisoft.com/" eudora="autourl">http://www.grisoft.com</a>).<br>
Version: 6.0.449 / Virus Database: 251 - Release Date: 1/27/2003</blockquote>
<x-sigsep><p></x-sigsep>
Greg Newell<br>
<a href="mailto:gnewell@ameritech.net" eudora="autourl">mailto:gnewell@ameritech.net</a></body>
</html>