<html>
<font size=3><br>
Is the let-off too close? Or the repetition lever upstop screw adjusted
to close?<br>
<br>
If they are, then once the string is struck and is oscillating, the
hammer will be brought<br>
to within the envelope of this undulation upon repetition or repetition
lever lift after check-in.<br>
<br>
Also, if the wippen assist springs are too high, that will cause problems
as well.<br>
<br>
Regards,<br>
<br>
Jon Page, piano technician<br>
Harwich Port, Cape Cod, Mass.<br>
<a href="mailto:jonpage@mediaone.net" eudora="autourl">mailto:jonpage@mediaone.net</a><br>
<a href="http://www.stanwoodpiano.com/" eudora="autourl">http</a><a href="http://www.stanwoodpiano.com/" eudora="autourl">://www.stanwoodpiano.com</a><br>
<br>
PS note: former address is once again activated but the one with
<2001> is valid as well.</font></html>