<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" =
http-equiv=Content-Type>
<META content="MSHTML 5.00.2614.3500" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Dear list, some months ago I detailed =
an event
concerning a steinway m that I service in our local library. Some may =
recall
that a pianist had run a room humidifier for several weeks in sept. and =
oct near
this piano. The pitch was 60 cents sharp !. ( I've since made =
a
proposal to the board for a climate control system.) =
Update... @ 30%
humidity ,Tuning has been stabilized and block, board , ribs and bridges =
so far are fine. My problem now is in seized action centers. The =
action
was reconditioned and regulated five years ago . polished keypins =
and
capstans, bolstered and lubed knuckles , lubed rep springs, =
and
balanciers etc , etc . Very little teflon work was needed and the piano =
had been
playing well. I spoke with a Steinway tech from our local dealer =
in Boston
and with Kent Webb @ S+Sons N.Y.seeking advice today. Both felt that the =
variable in this actions performance was this high humidity =
condition,and both
suggested protek as a what have you got to lose attempt to free =
this
action. On a sample hammer I went from one swing to three with the =
protek
, Better, so I applied to all centers but its still very sluggish. My
questions: What is actually happening to the bushing to cause this
and</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2> Short of an action rebuild, Do I =
repin every
center, and if so what happens when we go back to higher humidity . =
Thanks for
your responses Tom =
Driscoll</FONT></DIV></BODY></HTML>