<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" =
http-equiv=Content-Type>
<META content="MSHTML 5.00.2919.6307" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>I just finished refurbishing/regulating a Brambach action (salvage
operation) with the square knuckles (major yucko). You need to hear from =
someone
else of knowledge on this, BUT I believe you will want to do a little =
bit of
basic action geometry anaysis here and simply determine what =
flange/knuckle
size/knuckle position setup is going to work best for you and replace =
the
hammers, shanks, knuckle, and flange with a modern setup of correct =
geometry.
Are the repetition levers modern? Or are they those half-as#%& ones =
with the
jack to the pianist end of the little repetition stub (no repetition =
lever
window for the jack to show through)? If you have these goofy ones, can =
I assume
you will be replacing these? Or is this not a complete rebuild? The =
bottom line
is that I am not sure it would work well if you mate modern/normal =
knuckles to
the old, cheap, goofy (I don't really know this, but I think it is true) =
repetition setup I see frequently on small, inferior-quality pianos of =
the early
20th Century.</DIV>
<DIV> </DIV>
<DIV>Terry Farrell<BR>Piano Tuning & Service<BR>Tampa, Florida<BR><A =
href="mailto:mfarrel2@tampabay.rr.com">mfarrel2@tampabay.rr.com</A></DI=
V>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: =
0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A href="mailto:tomhoch@egl.net" title=tomhoch@egl.net>Tom =
Hochhalter</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
href="mailto:pianotech@ptg.org"
title=pianotech@ptg.org>pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, November 21, =
2000 9:53
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Brambach Grand Hammer
Butts</DIV>
<DIV><BR></DIV>
<DIV><FONT size=2>To all,</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>I'm in the middle of rebuilding a Brambach =
grand piano,
and I'm in need of replacing the hammer butts. Yes, this is a =
grand
piano action with hammer butts, rather than hammer shank and =
knuckle.
The knuckle on these butts is square/rectangle, and consist of action =
cloth
and buckskin. Does anyone have a set or number of them? Or =
does
anyone know of where I can get some? I've contacted Schaff and =
American, no
such luck there. Any info would be helpful. Thanks in
advance. Tom</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>Tom Hochhalter, RPT</FONT></DIV>
<DIV><FONT size=2>Holland, MI</FONT></DIV>
<DIV><FONT size=2><A
href="mailto:tomhoch@egl.net">tomhoch@egl.net</A></FONT></DIV>
<DIV> </DIV></BLOCKQUOTE></BODY></HTML>