<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1505" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>Hi Folks ,</FONT></DIV> <DIV><FONT face=Arial size=2>Gotta give the other Joe G a thanks for = the insight to make the better design on my original try.</FONT></DIV> <DIV><FONT face=Arial size=2>The second attempt produced a 1/4" hex = tool but the working end is minus the hook that I thought might be needed to hold the = tool on the capstan. And is now much stronger. </FONT></DIV> <DIV><FONT face=Arial size=2>Total length is about 2 1/2"  with = the tip 7/16" X .103" Leaving clearance to be used with the keys still on the rail.        </FONT></DIV> <DIV><FONT face=Arial size=2>The bit will work in a small = cordless electric screw driver or larger unit if you want the power or a standard 1/4" hex = drive handle for manual removal  of a few.</FONT></DIV> <DIV>Joe Goss RPT<BR>Mother Goose Tools<BR><A href="mailto:imatunr@srvinet.com">imatunr@srvinet.com</A><BR><A href="http://www.mothergoosetools.com">www.mothergoosetools.com</A></DI= V> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; = BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- = </DIV></BLOCKQUOTE></BODY></HTML>