<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Hey there Roger !!
<p>I didnt mean specs as in quality control.... grin. I mean they specify
a certain design and Kelly produces it. However bad Kelly may or may not
be, I am sure they can get struts and the like in the right place... or
what ?
<p>Skål !
<p>RicB
<p>Roger Jolly wrote:
<blockquote TYPE=CITE>>
<br>>Its their design. Kelly makes the plates to Steinways specification.
And
<br>>one thing that Ron mentioned I'll agree with.... namely that this
issue isnt
<br>>about this piano or the other.
<p>Hi Ric,
<br>
I very much doubt that Kelly make's any thing, to any one's
<br>specifications. They sure as heck did not make Baldwin plates
to Baldwin's
<br>spec's, it was a continuous quality control battle.
<br>They are the root cause of needing to use different bore distances
in
<br>different sections of the piano.
<br>Regards Roger
<br><a href="https://www.moypiano.com/resources/#archives"></a> </blockquote>
<p>--
<br>Richard Brekne
<br>RPT, N.P.T.F.
<br>UiB, Bergen, Norway
<br><A HREF="mailto:rbrekne@broadpark.no">mailto:rbrekne@broadpark.no</A>
<br><A HREF="http://home.broadpark.no/~rbrekne/ricmain.html">http://home.broadpark.no/~rbrekne/ricmain.html</A>
<br><A HREF="http://www.hf.uib.no/grieg/personer/cv_RB.html">http://www.hf.uib.no/grieg/personer/cv_RB.html</A>
<br> </html>