<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1106" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><STRONG><FONT face=Arial>You did remember to put a 90 degree turn on the end, and insert it in the hole in the pin, didn't you?</FONT></STRONG></DIV> <DIV><STRONG><FONT face=Arial>Remember and turn the pin out first, or you wont have enough room for the coils.</FONT></STRONG></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2>John M. Ross<BR>Windsor, Nova Scotia, Canada<BR><A href="mailto:jrpiano@win.eastlink.ca">jrpiano@win.eastlink.ca</A></FONT></DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> <A title=jstuchell@usachoice.net href="mailto:jstuchell@usachoice.net">Jonathan Stuchell</A> </DIV> <DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, September 09, 2004 10:22 PM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> Fw: installing new treble wire on a spinet</DIV> <DIV><BR></DIV> <DIV> </DIV> <DIV style="FONT: 10pt arial">----- Original Message ----- <DIV style="BACKGROUND: #e4e4e4; font-color: black"><B>From:</B> <A title=jstuchell@usachoice.net href="mailto:jstuchell@usachoice.net">Jonathan Stuchell</A> </DIV> <DIV><B>To:</B> <A title=pianotech@ptg.org href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV> <DIV><B>Sent:</B> Thursday, September 09, 2004 9:16 PM</DIV> <DIV><B>Subject:</B> installing new treble wire on a spinet</DIV></DIV> <DIV><BR></DIV> <DIV><FONT face=Arial size=2>I am a novice and need advice on how to coil treble wire around the tuning pin. I am attempting to install a new treble wire on two pins.    When I  turn the pin clockwise with the tuning hammer the wire will not wind around to set the coils.  Any help would be appreciated .  Thank you.</FONT></DIV></BLOCKQUOTE></BODY></HTML>