<html>
<body>
Hey, Joe. Well, where's the picture????? :-) <br><br>
Avery <br><br>
At 12:55 PM 8/1/05, you wrote:<br>
<blockquote type=cite class=cite cite="">
<font face="Arial, Helvetica" size=2>Hi Folks ,<br>
Gotta give the other Joe G a thanks for the insight to make the better
design on my original try.<br>
The second attempt produced a 1/4" hex tool but the working end is
minus the hook that I thought might be needed to hold the tool on the
capstan. And is now much stronger. <br>
Total length is about 2 1/2" with the tip 7/16" X
.103" Leaving clearance to be used with the keys still on the
rail. <br>
The bit will work in a small cordless electric screw driver or larger
unit if you want the power or a standard 1/4" hex drive handle for
manual removal of a few.<br>
</font>Joe Goss RPT<br>
Mother Goose Tools<br>
<a href="mailto:imatunr@srvinet.com">imatunr@srvinet.com</a><br>
<a href="http://www.mothergoosetools.com" eudora="autourl">
www.mothergoosetools.com</a><br>
<dl>
<dd>----- <br>
</dl></blockquote></body>
</html>