<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Dear Oops group,
<p>My purpose for starting this discussion was to cover procedures up to
but not including the tuning of the piano, including any slick or sneaky
procedures I could have used to get out of the hole caused by my error.&nbsp;
When I finish however many passes it takes to accomplish the pitch raise,
then I am ready to start tuning.&nbsp; I prefer at this point to have all
strings of the piano either roughly on pitch or slightly sharp so I am
not chasing the pitch from the under side when I am trying to tune.&nbsp;
If I find that situation then I do another pass in that section to correct
the problem, but I would much rather get it right the first time if possible.
<p>Warren
<p>David Ilvedson wrote:
<blockquote TYPE=CITE>&nbsp;I think the "dead-on" lasts about as long as
it takes the tuner to close his kit or is out the door...;-[]&nbsp; I don't
even think about a stable tuning with a 100 cent change...too many things
going ...I simply do the best I can and schedule the real tuning for 3
to 6 months.&nbsp;David I.
<blockquote 
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid"><font face="arial,helvetica"><font size=-1>A
100 cent pitch raise "dead on" in 2 passes?&nbsp; If you say so.</font></font>
<p><font face="arial,helvetica"><font size=-1>Bill Bremmer RPT</font></font>
<br><font face="arial,helvetica"><font size=-1>Madison, Wisconsin</font></font></blockquote>
</blockquote>

<p>--
<br>Warren Fisher RPT
<br>fish@Communique.net
<br>1422 Briarwood Dr.
<br>Slidell, LA 70458-3102
<br>&nbsp;</html>