<HTML><FONT FACE=arial,helvetica><FONT SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0"> Terry</FONT><FONT COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0"></BLOCKQUOTE><BR>
<BR>
</FONT><FONT COLOR="#000040" style="BACKGROUND-COLOR: #ffffff" SIZE=2 FAMILY="SANSSERIF" FACE="Verdana" LANG="0"><I> acetone or most commonly lacquer thinner is used as an after wash to remove any left over residues. It's not as common any more because of the water wash stripper but we more commonly rewash all the stripped parts with T.S.P and steel wool for that purpose.<BR>
Can you post the address and info for oxford products? Thanks<BR>
>>>>>>>Dale Erwin>>>>>>>>>>></FONT><FONT COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0"></I><BR>
</FONT><FONT COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0"><BR>
<BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">I recommend you consider water-base lacquers. No stink, and you won't blow yourself up. I use Oxford Premium Spray lacquers, as do several others on this list.<BR>
<BR>
Any good paint store has adequate gloves. Just get some that say they will resist nasty solvents. I have several different pair that the stripper does not penetrate. Acetone is not too nasty. If the gloves don't melt from the stripper, they won't have a problem with acetone (or rather, probably not!). Acetone? I've not heard of using acetone after stripper. What kind of stripper are you using?<BR>
<BR>
</BLOCKQUOTE><BR>
</FONT><FONT COLOR="#000040" style="BACKGROUND-COLOR: #ffffff" SIZE=2 FAMILY="SANSSERIF" FACE="Verdana" LANG="0"><I><BR>
</I></FONT></HTML>