<HTML>In a message dated 6/3/2002 4:13:56 PM Pacific Standard Time, mfarrel2@tampabay.rr.com writes: <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Subj:Water-Base Laquer, was: Chemical resistant gloves Date:6/3/2002 4:13:56 PM Pacific Standard Time From:<A HREF="mailto:mfarrel2@tampabay.rr.com">mfarrel2@tampabay.rr.com</A> Reply-to:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A> To:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A> Sent from the Internet         Terry</BLOCKQUOTE>   Thanks for the web site. I think this thread on strippers went round before but, I'll ask anyway as to the effectiveness of these water based strippers compared to the chemical nasty ones I use.   By the way I was at Jon pages shop two weeks ago and I was very sold on the ebony finish he had done in water based lacquer.   Thanks>>>>Dale Erwin <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px"> http://www.homesteadfinishing.com/ http://www.homesteadfinishing.com/oxford.htm The first link is Homestead Finishing home page, the second their page addressing Oxford products. I had bought a 10 gallons of a stripper that is water-washable and just didn't know much about those that might require solvents to clean up the stripper mess. Terry Farrell   </BLOCKQUOTE> </HTML>