<P>If I try to tap the balance rail pin to the side to straighten the way the key sits, then the key is sitting against the adjacent key in the key button area. There is not enough room to tap it over far enough to compensate for the leaning created by the twist.&nbsp; I may try to move it over from the back like you said, that might be easier than reshaping the front and refitting the key top. 
<P>I wondered if anyone would suggest some method of steaming the key wood while clamped in vices to untwist then letting it dry being held in the correct shape.&nbsp; But, perhaps key buttons would come unglued, bushings may get loosened etc, with steam being applied.
<P>Bob
<P>&nbsp;<B><I>Dave Bunch &lt;pdtek@mchsi.com&gt;</I></B> wrote:
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">
<META content="MSHTML 6.00.2719.2200" name=GENERATOR>
<STYLE></STYLE>

<DIV><FONT face=Arial size=2>If the two adjacent keys were not there, could you square and level it? In other words, is binding at the rear of the key what is keeping you&nbsp;from lining things up in front? If so, you might be able to reshape the rear of the key enough to make it work. You could even plug and redrill for the capstan if needed.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT>&nbsp;</DIV>
<DIV><FONT face=Arial size=2>Dave Bunch</FONT></DIV>
<BLOCKQUOTE style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> <A title=hullfam5@yahoo.com href="mailto:hullfam5@yahoo.com">Bob Hull</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, April 01, 2003 8:55 PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Twisted key</DIV>
<DIV><BR></DIV>
<P>List,</P>
<P>I tuned a Baldwin Hamilton today that has a twisted or warped white key.&nbsp; It can't be leveled with the others or squared.&nbsp; The front of the key is twisted compared to the back.&nbsp; When you set it on a flat surface you can really see the twist - the front left corner of the&nbsp; key is up in the air about 1/8".&nbsp; I know sometimes you can force a wedge into a kerf cut into a key that is bent or warped, but it doesn't seem like that would work on this twisted key.&nbsp; I would appreciate your suggestions.&nbsp; </P>
<P>Bob</P>
<P><BR>
<HR SIZE=1>
Do you Yahoo!?<BR><A href="http://us.rd.yahoo.com/finance/mailsig/*http://tax.yahoo.com">Yahoo! Tax Center</A> - File online, calculators, forms, and more</BLOCKQUOTE></BLOCKQUOTE><p><br><hr size=1>Do you Yahoo!?<br>
<a href="http://us.rd.yahoo.com/finance/mailsig/*http://tax.yahoo.com">Yahoo! Tax Center</a> - File online, calculators, forms, and more