<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1491" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>I am repining the back-action on a = 10-year old (about) Hyundai grand. The piano has a PianoDisk CD system installed on = it (just the playback feature). I was thinking that it would be easiest to = reassemble the back-action outside of the piano rather than with the back-action rail = installed on the belly rail. However, it appeared there was no way to remove the back-action while it was assembled - because the PianoDisk plunger = thingees (the things that activate the keys) interfere - so I assume it would not = be possible to install it after it is assembled. I thought it might be = easiest to drop the PianoDisk rail (with the plunger thingees) out of the way for back-action installation.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>So, the question is: How difficult is = it to remove/re-install the PianoDisk plunger rail - and if it is a reasonably = thing to do, any tips? My guess is that I could figure it out on my own - I = imagine just a few nuts/bolts/screws to remove the thing just drops down (unplug = first!) - but I also figure it is always best to ask someone that has done this = before. Anyone?</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Thanks.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Terry = Farrell</FONT></DIV></BODY></HTML>