<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Wim,
<br> Call Young Chang! You definitely have growing action
brackets. They will send you out a new set and allow some money for installation
and regulation. It's a pretty straight forward job and goes fairly quickly.
<p>Greg
<p>Wimblees@AOL.COM wrote:
<blockquote TYPE=CITE><font face="arial,helvetica"><font size=-1>I hate
to be the one with all the problems lately, but that's what so great about
this list. Ask, and you get results.</font></font>
<p><font face="arial,helvetica"><font size=-1>Last night I inspected a
10 year old Weber grand where the hammers are blocking on the strings.
I tried to remove the action, but the drop screws are hitting the pin block.
I was afraid if I pulled to hard to get it free, it would peel back the
polyester of the stretcher.</font></font>
<p><font face="arial,helvetica"><font size=-1>Except for the low bass,
there was actually lost motion between the keys and the wippens. That is
why I tried to remove the action. If I recall, there was some talk earlier
about Young Chang action brackets "growing." I looked at them, but could
not see anything unusually. They are light blue.</font></font>
<p><font face="arial,helvetica"><font size=-1>I didn't have my tuning kit
with me, so I couldn't lower the glide bolts to see if that would help.
But I don't think that is the problem. Structurally I couldn't see anything
wrong.</font></font>
<p><font face="arial,helvetica"><font size=-1>Anyone with a solution.</font></font>
<p><font face="arial,helvetica"><font size=-1>Wim</font></font></blockquote>
<p>--
<br>Greg Newell
<br><A HREF="mailto:gnewell@ameritech.net">mailto:gnewell@ameritech.net</A>
<br> </html>