<!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> Grin... Ah the heck with it... Lets all agree to put a 12 foot 6 coloured neon dancing bar maid with the following blinking sign on the top of the piano. <blockquote>"Welcome to Jamiaca, Have a nice day" <blockquote>"B.J. Rebuilders & Co"</blockquote> </blockquote> Roger Jolly wrote: <blockquote TYPE=CITE>Hi Ric,              I was thinking of sticking a large size logo on the house side of the piano, just to let every one know it was no longer brand X.    BUT I WONDER IF THAT WOULD CAUSE A STIR.   <G>  Right beside it a damp chaser logo.  Then a Renner Hammer logo. Etc.   piano can look like a tuned up, formula 1 racing brand.   Monte Carlo, here we come.   Suppliers please remit discount rebate. Joking aside, many retailers install a small sticker with store logo and phone number, and no one raises an eye brow. I often install engraved brass plates on pianos that have been donated to institutions, by individuals or groups.   I see nothing wrong in this.   Good people need to be acknowledged.  Just do it with good taste. On major rebuilding jobs I neatly write the data on number 1 bass key, for posterity or future techs. Over size pins, or new block etc. regards Roger.  </blockquote> This was kind of you to say Roger.  You got it right about the tweeking. Its voiced very nicely now and can really project at all volumes. Good advice from Andre has helped a lot. Its my favorite toy ! <blockquote TYPE=CITE>  PS   that Steinway at the Grieg Academy was very nice, good Job. Nice open and transparent sound at ppp.  No doubt you have tweeked it some more since.  </blockquote> Cheers RicB -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway <A HREF="mailto:rbrekne@broadpark.no">mailto:rbrekne@broadpark.no</A> <A HREF="http://home.broadpark.no/~rbrekne/ricmain.html">http://home.broadpark.no/~rbrekne/ricmain.html</A> <A HREF="http://www.hf.uib.no/grieg/personer/cv_RB.html">http://www.hf.uib.no/grieg/personer/cv_RB.html</A>  </html>