<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2802" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; =
FONT-FAMILY: Arial"
bottomMargin=7 bgColor=#ffffff leftMargin=7 topMargin=7 =
rightMargin=7>
<DIV><FONT size=3>Hi Tom,</FONT></DIV>
<DIV><FONT size=3>I agree with you. I keep forgetting how picky some =
of the
folks are on the list. Thank you for the information on this =
procedure.
</FONT></DIV>
<DIV><FONT size=3>Marshall</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=tomtuner@verizon.net =
href="mailto:tomtuner@verizon.net">TOM
DRISCOLL</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">Pianotech List</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, February 24, 2006 =
2:17
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: a hammer =
question</DIV>
<DIV><BR></DIV>
<DIV> </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=pianotune05@comcast.net
href="mailto:pianotune05@comcast.net">pianotune05</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">Pianotech List</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, February 24, =
2006 12:45
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: a hammer =
question</DIV>
<DIV><BR></DIV>
<DIV><FONT size=3>Hi Tom,</FONT></DIV>
<DIV><FONT size=3>I would simply undue the old shank from the =
action
---<EM><FONT color=#0000ff>Undo? No . Remove the butt and =
pull-drill the old
shank out.</FONT></EM>and replace it after gluing the hammer head =
back on
right? <FONT color=#0000ff>No, Reinstall the butt ,and glue =
in the new
shank with titebond establishing a glue collar at the butt, making =
sure the
spacing is correct and the catcher lines up with =
it's neighbors.Let dry
about 15 -20 minutes . Mean while pull- drill out the shank =
from the
hammer, trim the length of the shank as required</FONT> . =
<FONT
color=#0000ff>Dry fit the hammer to the shank so it aligns =
perfectly with
the adjacent hammers. Glue the hammer to the shank with titebond, =
rechecking
for exact alignment and again creating a glue collar</FONT><FONT
color=#000000>. </FONT><FONT color=#0000ff>I knurl the gluing =
surface area
of the shank to both size and create "pockets-spaces " for the =
glue.
Check shank travel and paper the flange if =
necessary</FONT></FONT></DIV>
<DIV><FONT size=3>I' m sure taking a hammer out of the piano =
shouldn't be
too difficult. I have an old action here in my office at home that I =
kept
from a piano just for learning purposes. <FONT =
color=#0000ff>Good,
Practice on the old action</FONT> <FONT color=#0000ff>, use =
correct
nomenclature-- Example : " Undo the shank from the action " is =
better stated
" Remove the shank from the Butt "</FONT></FONT></DIV>
<DIV> <FONT color=#0000ff size=3>Marshall, You =
will have
much better exchanges here on the list if you take the =
time and
effort to learn the names of the parts- procedures and then present =
your
queries.</FONT></DIV>
<DIV> <FONT color=#0000ff size=3>Best =
Wishes,</FONT></DIV>
<DIV> <FONT color=#0000ff size=3>Tom Driscoll
RPTired</FONT></DIV>
<DIV> </DIV>
<DIV><FONT color=#0000ff size=4></FONT> </DIV>
<DIV><FONT color=#0000ff size=3></FONT> </DIV>
<DIV><FONT =
size=3>Marshall</FONT></DIV></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>