<!doctype html public "-//W3C//DTD W3 HTML//EN">
<html><head><style type="text/css"><!--
blockquote, dl, ul, ol, li { padding-top: 0 ; padding-bottom: 0 }
--></style><title>Re: seating strings</title></head><body>
<blockquote type="cite" cite><font face="Arial" size="-1">Hello List
and Phillip Ford who said:</font></blockquote>
<blockquote type="cite" cite><br></blockquote>
<blockquote type="cite" cite>>String speaking length terminated on
the rim? Now you've completely lost me. Any possibility of
some pictures?</blockquote>
<blockquote type="cite" cite><font face="Arial" size="-1">In answer to
my comment: "String spacing is by the holes on one side and
string speaking-length is terminated on the rim
opposite."</font></blockquote>
<blockquote type="cite" cite><font face="Arial" size="-1">Sorry, I
didn't have my camera with me. Maybe the choice of the term "rim"
was unfortunate. OK. Imagine now that these agraffes are made from a
strip of channelled brass. Individual agraffes are cut from this
material. Holes (three, two or one) are drilled through one "rim"
or "side" or "upright" of this cut off piece of
channel. This is for string spacing. The other "rim or
"side" or "upright" is only as high as the
centre of the three spacer holes opposite it. This is where the
speaking length of the string "terminates". Of course the
actual string continues to the hitch in one direction and to the wrest
pin in the other direction. Each agraffe is held in place by a c/s
brass wood screw, there being a counter-sunk hole drilled through the
base of the agraffe.</font></blockquote>
<blockquote type="cite" cite><font face="Arial" size="-1">I know a
picture is worth a thousand words, Phillip, but you've had to put up
with the words! :-)</font></blockquote>
<blockquote type="cite" cite><font face="Arial"
size="-1">Regards</font></blockquote>
<blockquote type="cite" cite><font face="Arial" size="-1">Michael
G.(UK)</font></blockquote>
<div><br></div>
<div>Thanks Michael. I think I got it. Perhaps the oldest
form of bridge agraffe. I've never seen one of these. It
sounds similar in concept to the agraffes on a Feurich that I have.
The string termination is on a half round 'lip' with string spacing
and down force on the lip provided by a conventional agraffe. I
believe I have a picture of this around here somewhere. I'll
send it along when I find it.</div>
<div><br></div>
<div>Phil Ford</div>
</body>
</html>