<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=US-ASCII"> <META content="MSHTML 6.00.2800.1106" name=GENERATOR></HEAD> <BODY id=role_body style="FONT-SIZE: 12pt; COLOR: #000000; FONT-FAMILY: = Verdana" bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=rol= e_document face=Verdana color=#000000 size=3> <DIV>Hi all,</DIV> <DIV> </DIV> <DIV>I just finished tuning a satin walnut polyester piano that has a few lo= ose pins.  It's a couple of years old, and still under warranty, but I figu= red I try to CA a couple of pins anyway.  </DIV> <DIV> </DIV> <DIV>Just to prove that performing that operation requires care and patience= , I spilled a very small amount on the keyslip....:-([(</DIV> <DIV>At least it isn't laquer.  I got most of it off before it had time= to set, but as we all know, the stuff dries durned fast!  So there are a couple of very small marks on the front.  </DIV> <DIV> </DIV> <DIV>The finish doesn't appear to be damaged at all, and it's hardly visible= , but I can see it.  I'd like to do right by the customer and get it off = if possible, but I didn't want to apply chemicals that might take the finish of= f in conjunction with the glue...</DIV> <DIV> </DIV> <DIV>If any of you have an idea about how to remove this stuff, please let m= e know!</DIV> <DIV> </DIV> <DIV>It's always on the fourth tuning of the day...</DIV> <DIV> </DIV> <DIV>Thanks in advance!</DIV> <DIV> </DIV> <DIV>Dave Stahl</DIV></FONT></BODY></HTML>