<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2600.0" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT size=2>I'm replacing a set of capstans on a 1930's = Steinway.  The shank diameter of the original is slightly larger than the German = capstans I've been using.  The current location is correct so I don't need = to plug and redrill.  I could order a set from Steinway at $100. but I = just can't bring myself to do it when I have a stock of German ones at $29.00 = a set.  I'd like to size the hole a bit, won't take much, = but I want to be sure that I have a good fit without any seizing.  = Any suggestions as to the best substance or material to use for = sizing?  </FONT></DIV> <DIV><FONT size=2></FONT> </DIV> <DIV><FONT size=2>David Love</FONT></DIV> <DIV><FONT size=2></FONT> </DIV> <DIV><FONT size=2>  </FONT></DIV></BODY></HTML>