<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1491" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>John,</FONT></DIV> <DIV><FONT face=Arial size=2>Check the pivot pin where it goes = through the unicorda lever. I've seen a mis-drilled situation where the pin was = pivoting in the lever, instead of on the lever mount bushings. Lube the pivot = bushings with VJ. If the pin is loose in the lever, a slight peening will make it = tight. Also, try lubing the keybed at the glide points.</FONT></DIV> <DIV><FONT face=Arial size=2>Best Regards,</FONT></DIV> <DIV><FONT face=Arial size=2>Joe Garrett, R.P.T.<BR>Captain, Tool Police<BR>Squares R I</FONT></DIV></BODY></HTML>