<html>
<body>
<br>
Chuck,<br>
<x-tab> </x-tab>Nope, no
picture needed. Not a bad idea if you can be sure to prevent the aluminum
channel from sliding and gouging at the ends.<br>
Thanks for the post.<br>
Greg Newell<br><br>
<br>
At 09:43 AM 12/9/2004, you wrote:<br>
<blockquote type=cite class=cite cite><font face="arial" size=2>A ne=
at
thing Tom Servinsky showed me: Sheet aluminum bent in a ‘U’ shape,
cut to about 12”-18” lengths (to fit around curves as well), and lined
with scrap felt/wool material (from string cover scrap), deep enough to
cover most of inside of rim. Made a bunch of them that fit easily
into a box that goes up on top shelf until needed again.<br>
Get the picture? Or is a picture needed?<br>
Chuck C. (FL) </blockquote>
<x-sigsep><p></x-sigsep>
Greg Newell<br>
Greg's piano Forté<br>
<a href="mailto:gnewell@ameritech.net"=
eudora="autourl">mailto:gnewell@ameritech.net</a></font></body>
</html>