<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" =
http-equiv=Content-Type>
<META content="MSHTML 5.00.2014.210" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hi: </FONT></DIV>
<DIV><FONT face=Arial size=2>I am back on this list. I would =
like an
opinion from a piano tech who has experience with glueing plastic =
dampers to
plastic damper wire blocks. What is the best glue for this =
purpose.
I have a whole set to replace on a piano which was vandalized in a =
University
practice room. The whole set of dampers and damper levers were =
torn to
pieces along with about half of the hammer butts, shanks and
hammers.. I have been off the list for a while as my modem =
went bad
and I also changed my IP account. Thanks in advance, =
John
Freeman</FONT></DIV></BODY></HTML>