<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content=text/html;charset=iso-8859-1 = http-equiv=Content-Type> <META content="MSHTML 5.00.2614.3500" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT size=2>If there is room under the coils I would tap the = pins in a bit first.</FONT></DIV> <DIV><FONT size=2>Dick MT</FONT></DIV> <BLOCKQUOTE style="BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: = 0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: = black"><B>From:</B> <A href="mailto:bholden@wave.co.nz" title=bholden@wave.co.nz>Brian = Holden</A> </DIV> <DIV style="FONT: 10pt arial"><B>To:</B> <A = href="mailto:pianotech@ptg.org" title=pianotech@ptg.org>Pianotech Forum</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, January 18, 2000 = 5:06 PM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> Tuning Pin = Tightener</DIV> <DIV><BR></DIV> <DIV><FONT color=#000000 size=2>Hello List</FONT></DIV> <DIV><FONT color=#000000 size=2></FONT> </DIV> <DIV><FONT color=#000000 size=2>I am about to do a tuning pin = tightening job on an old English upright.  Because of economic reasons, I intend = using some Pacpin liquid tighter.  The piano will be laid on its back = and the solution will be applied with a syringe, with a second dose a few days = later.  Because of the age of the piano, the customer has little = to lose and hopefully the pins (which are moderately loose), should be able to = hold the tuning satisfactorily.  I am sure this is the recommended way = to apply the solution but if there is anything else I should be doing, = could someone let me know.  Thanks in advance.</FONT></DIV> <DIV><FONT color=#000000 size=2></FONT> </DIV> <DIV><FONT color=#000000 size=2>Brian Holden </FONT></DIV></BLOCKQUOTE></BODY></HTML>