<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD><TITLE>Removing Lindner cheekblocks</TITLE>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1170" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hi Sherry,</FONT></DIV>
<DIV><FONT face=Arial size=2>You found the critter! Yes you were at =
the door but
you needed to take off the fall board and remove the key strip to allow =
the key
to be raised up enough to get at the screw to remove the =
blocks.</FONT></DIV>
<DIV><FONT face=Arial size=2>The screw is usually in at an angle so =
examine the
head to try to see what angle is needed to remove it.</FONT></DIV>
<DIV>Joe Goss<BR><A
href="mailto:imatunr@srvinet.com">imatunr@srvinet.com</A><BR><A
href="http://www.mothergoosetools.com">www.mothergoosetools.com</A></DI=
V>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=swidmer@rochester.rr.com
href="mailto:swidmer@rochester.rr.com">Sherry</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">Pianotech</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Saturday, May 24, 2003 =
11:58
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Removing Lindner
cheekblocks</DIV>
<DIV><BR></DIV>
<BLOCKQUOTE>Hi,<BR> I felt greatly humbled today. =
I
planned to do some action work on a Lindner 5'8" grand but was =
unable to get
the cheekblocks out. I checked in the archives and noticed =
there was
another post in 2001 about this problem but couldn't find any =
answer.
Does anyone have any experience with this instrument who could =
give me
a step by step removal process. I found a screw on each
cheekblock parallel with the keyboard almost below the level of the =
keys
that could be the holding device but it was impossible to get to =
because of
the keys. When I tried to unscrew it, it was =
blocked by
the keys. Hope someone out there can
=
help.<BR> &nbs=
p;Thanks,
Sherry<BR><BR></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>