<!doctype html public "-//W3C//DTD W3 HTML//EN">
<html><head><style type="text/css"><!--
blockquote, dl, ul, ol, li { padding-top: 0 ; padding-bottom: 0 }
--></style><title>Measuring BR depth</title></head><body>
<div><font face="Arial" size="-4" color="#000000">>Pianotech has a
Balance rail hole reamer part # KCS-1B that will<br>
>do the job. Keep your finger firmly on the bottom of the BR hole
and<br>
>ream until the tip of the reamer touches your finger
tip.</font></div>
<div><br></div>
<div>I place the reamer in a hand-cranked hand drill and use the bench
surface as a stop.</div>
<div><br></div>
<div>This tool is inserted down through the b/r bushings. Not only
does it ream each key to</div>
<div>uniform thickness at the hole, it excavates any debris from the
area on top of the hole.</div>
<x-sigsep><pre>--
</pre></x-sigsep>
<div><br>
Regards,<br>
<br>
Jon Page</div>
</body>
</html>