<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
I'm not quite sure what you are saying... by<font color="#009900"> "Most
of the U/D weights are in the 16 to 20 difference. However, there are 24
notes that are</font>
<br><font color="#009900">just way out of spec."</font>&nbsp; but if you
are saying that DW minus UW is in the 16 to 20 gram range except for these
24 notes... then I think it be easier to help if you could put the numbers
in terms of BW and Friction.
<p>If Balance Weight varies radically, then that points to inconsistancies
in ratio related issues. You could be looking at some knuckle allignment
problem... not uncommon when a bolstering job is done... and not uncommon
otherwise.... Maybe the capstan line is a bit uneven as well... you know
the sort of thing. At the stage you are with this job, I like to rule out
ratio related problems before attacking friction stuff any further.
<p>Cheers
<br>RicB
<p>Joseph Garrett wrote:
<blockquote TYPE=CITE>Hey all,
<br>I'm trying to get the touch of a two year old M&amp;H "BB" within limits
of
<br>Upweight/Downweight. I've checked ALL of the pinning, it's in specs.
I
<br>properly eased all the keys, they're in specs. I buffed the capstans
and
<br>coated with Emralon. The Wippen Foot Felt and the Let-off Felt has
been
<br>treated with dry Teflon. The hammers were surfaced. The knuckles were
<br>bolstered, strip sanded and treated with Microfine Teflon. The hammers
tails
<br>were surfaced. The key pins were cleaned, polished and sprayed with
dry
<br>Teflon. The action has been Regulated to a gnat's eyebrow. Most of
the U/D
<br>weights are in the 16 to 20 difference. However, there are 24 notes
that are
<br>just way out of spec. These notes are interspersed through out the
whole
<br>action.
<br>I've checked everything, I can think of, and am at a lose. Feedback
would be
<br>appreciated!!!!
<br>I was up til' 4am finishing this thingee, so I may be missing something!
<br>Help! Gotta return the action this afternoon! :-(
<br>Best Regards,
<br>Joe Garrett, RPT, (Oregon)
<br>Captain, Tool Police
<br>Squares Are I
<p>_______________________________________________
<br>pianotech list info: <a href="https://www.moypiano.com/resources/#archives">https://www.moypiano.com/resources/#archives</a></blockquote>

<p>--
<br>Richard Brekne
<br>RPT, N.P.T.F.
<br>UiB, Bergen, Norway
<br><A HREF="mailto:rbrekne@broadpark.no">mailto:rbrekne@broadpark.no</A>
<br><A HREF="http://home.broadpark.no/~rbrekne/ricmain.html">http://home.broadpark.no/~rbrekne/ricmain.html</A>
<br><A HREF="http://www.hf.uib.no/grieg/personer/cv_RB.html">http://www.hf.uib.no/grieg/personer/cv_RB.html</A>
<br>&nbsp;</html>