<html> Hi Arthur,<br>               Glue the split out pieces together with thin CA glue and lightly clamp with a spring clamp use a tuning mute to prevent the yoke from pinching together.<br> Once dry 10 to 15min, glue a piece of veneer over the crack to give the joint some added strength, sand down the veneer as required.<br> Roger<br> <br> <br> <br> At 12:28 AM 06/08/99 -0400, you wrote: <br> <br> <blockquote type=cite cite>Dear List:<br> <br> I have a spinet repair of six keys. The keys are broken at the ends where the drop wire<br> and wooden button set. The wood has broken off the sides of the keys and the button<br> and drop wire slide out. Any suggestion on the repair would be appreciated. <br> Thanks in advance.<br> Arthur<br> <br> </blockquote><br> <br> <div>Roger Jolly</div> <div>Baldwin Yamaha Piano Centre</div> <div>Saskatoon and Regina</div> <div>Saskatchewan, Canada.</div> <div>306-665-0213</div> Fax 652-0505 </html>