<HTML> <HEAD> <TITLE>Re: Pocket RCT pitch raise problem?</TITLE> </HEAD> <BODY> Sounds like it's a semitone off. Hearing your A as a G#. .......... .  jason kanter . jkanter@rollingball.com= . jason.kanter@wamu.net .  manager . learning & performance development .  consumer loan servicing . washington mutual bank .  office 206 490 6708 . cell 425 830 1561 .  home (bellevue): 425 562 4127 . fax 425 562 4132 .  14847 ne 14th st . bellevue wa 98007 .  (orcas): 360 376 2799 . 136 perch tree lane . eastsound wa 98245<BR= > ............................... <BLOCKQUOTE> From: "Mike and Jane Spalding" <mjbkspal@execpc.com>= Reply-To: pianotech@ptg.org Date: Tue, 9 Jul 2002 07:53:55 -0500 To: <pianotech@ptg.org> Subject: Re: Pocket RCT pitch raise problem? </BLOCKQUOTE> <BLOCKQUOTE><TT>Tom, Sorry, can't help.  I've only done one pitch raise since trading for P= ocket, but it worked just like it's supposed to.  A4 started at 429, PR= CT gave me positive overpulls, after first pass everything within 2 cents. <= BR> Mike ----- Original Message ----- From: <Tvak@AOL.COM> To: <pianotech@ptg.org> Sent: Tuesday, July 09, 2002 7:18 AM Subject: Pocket RCT pitch raise problem? > Anybody else have a problem with Pocket RCT's pitch raise function? &n= bsp;I get > negative offset values on pitch raises.  In other words, it tells= me to tune > all the notes flat, with the target to the left of center.  For e= xample, I > sampled my Yamaha U1 just now and A4 reads 438.85.  In pitch rais= e mode, the > target is to the left of center, and the offset is > -1.38.  Each succesive note gives me a larger negative offset. &n= bsp; > > Of course, when the notes are flat I need to pull the notes sharp, and= the > target should be on the right with a positive offset reading. > > With so few options I find it hard to believe I've toggled something t= he > wrong way, but it's usually human error with these kind of things. > > I am an experienced RCT user (laptop version) and I've never had this = problem > before.  Pitch raise settings are all at default except for &quot= ;lowest plain > wire string". > > Help, anyone? > > Tom Sivak > </TT></BLOCKQUOTE><TT> </TT> </BODY> </HTML>