<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#d8d0c8>
<DIV><FONT size=2>Avery,</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>I'm afraid I'm misunderstanding you (or not getting =
a
joke?). Do you get single strings with premade coils? I =
was responding to the comment that single strings would save time =
in a
factory setting...</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>I've only helped in a restringing by standing at the =
tail end
and threading the up through the bridge pins, but it sure seems that =
after an
octave or so, you'd really be into the rhythm of it: three fingers past =
the pin
hole, snip, thread through pin, make right angle for becket, three turns =
with
the T-handle, pound it in, lift the coil, and tighten it up a little =
more.
My guess is it takes experienced people, what, maybe two hours to string =
a
grand? It's awesome to see.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>--Cy--</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=avery@ev1.net href="mailto:avery@ev1.net">Avery Todd</A> =
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">Pianotech</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, March 22, 2004 =
4:11
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: There's always a =
hitch</DIV>
<DIV><BR></DIV>Cy, <BR><BR>And how many seconds/minutes does it take =
you to
make all those individual coils<BR>for an entire piano and make it =
look as
good as the factory does? :-) <BR>Just wishing I could do it better!
<BR><BR>Avery <BR><BR>
<BLOCKQUOTE class=cite cite="" type="cite"><FONT =
size=2>Compare that with a
bulk reel of wire of a certain gauge: only takes a second to snip it =
to the
right length, and you've got the same number of tuning pin coils to
make.<BR></FONT> <BR><FONT size=2>--Cy =
Shuster--<BR>Rochester,
MN<BR></FONT>
<DL>
<DD>----- Original Message ----- <BR>
<DD>From:</B> <A href="mailto:mark@nhpianos.com">Mark =
Dierauf</A> <BR>
<DD>To:</B> <A =
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> <BR>
<DD>Sent:</B> Monday, March 22, 2004 10:35 AM<BR>
<DD>Subject:</B> RE: There's always a hitch<BR><BR>
<DD><FONT face=arial color=#000080 size=2>I would think that =
you might
expect slightly better tuning stability with this system. On large =
pitch
changes there’s no way that the tension of one string of a =
unison can
effect the other strings as might be the case with normal strings =
looped
around a hitch-pin. Having all three strings the same length from
hitch-pin to tuning pin can only help. My thinking is that once =
set up it
might save significant time during the factory stringing process =
by having
all strings pre measured for any given scale.<BR></FONT>
<DD><FONT face=arial color=#000080 size=2>- =
Mark<BR></FONT><FONT
face="Times New Roman, Times"><BR></FONT><BR>
<DD><FONT
face="Times New Roman, =
Times"><BR></FONT> </DD></DL></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML=
>