<html> <font size=3>At 12:24 PM 12/16/2000 -0500, you wrote:<br> <blockquote type=cite cite>Hi Shoprats! It's bridge notching time for me. I have two of David MAZZAGLIA<br> wonderful bridge notching chisels, but am a dunce when it comes to<br> sharpening them. What are the methods/equipment used by you folks to sharpen<br> them. I found the Tormek SuperGrind on the web, but it's a tad pricey. I<br> worry about maintaining proper bevel angles, etc. What about Japanese<br> waterstones. I'm at a total loss. Help!<br> <br> Terry Farrell<br> Piano Tuning & Service<br> Tampa, Florida<br> mfarrel2@tampabay.rr.com</blockquote><br> <br> A piece of 600 or finer sandpaper on a sheet of glass will put a nice edge on your chisel<br> without the expense of wet stones and have to find a place to store them when you are not<br> using them 99.999999999999999999999999999999999999999999999999999999999999<br> 99999999999999999999999999999999999999999999999999999999% of the time.<br> <br> If tool edge maintenance were a daily task it would be another story.<br> <br> B#,<br> <br> </font><br> <div>Jon Page,   piano technician</div> <div>Harwich Port, Cape Cod, Mass.</div> <div><a href="mailto:jonpage@mediaone.net" EUDORA=AUTOURL>mailto:jonpage@mediaone.net</a></div> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </html>