<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 5.50.4134.100" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>2. Rather than tilt the piano, with =
all the
associated stresses and risks, why not lift at the corners and put it =
on
supports high enough to be able to take out the legs (or one at a
time)?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Alan R. Barnard</FONT></DIV>
<DIV><FONT face=Arial size=2>Salem, MO</FONT></DIV>
<DIV><FONT face=arial,helvetica><FONT =
size=2></FONT></FONT> </DIV>
<DIV><FONT face=Arial size=2>I had to work on some legs with no =
help
available. From scrap material with a hand saw and a cordless
drill</FONT> <FONT face=Arial size=2>I built a T with a piece =
of plywood
fixed to the side for stability and covered the top with carpet. Took =
me less
than 10 minutes. A clean drop cloth and a piece of plywood to set the =
$20
wal-mart hydraulic floor jack on. Cheap help that doesn't complain =
about
having to wait around while you set up and holds the piano up as long =
as you
want. I picked some good pieces of scrap as I only had to cut one 2x4 =
with the
hand saw on the job.</FONT></DIV>
<DIV><FONT face=Arial size=2>Keith =
R</FONT></DIV></BLOCKQUOTE></BODY></HTML>