<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1276" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Dave, Those ends need to be blunted so
that&nbsp;the&nbsp;reamer can&nbsp;go through the center of the felt
better.</FONT></DIV>
<DIV>Joe Goss<BR><A
href="mailto:imatunr@srvinet.com">imatunr@srvinet.com</A><BR><A
href="http://www.mothergoosetools.com">www.mothergoosetools.com</A></DI=
V>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV
  style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
  <A title=Piannaman@aol.com
  href="mailto:Piannaman@aol.com">Piannaman@aol.com</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
  href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, April 02, 2004 =
8:45
AM</DIV>
  <DIV style="FONT: 10pt arial"><B>Subject:</B> Re: thumb protection =
when
  re-pinning</DIV>
  <DIV><BR></DIV><FONT face=arial,helvetica><FONT size=2 =
PTSIZE="10">Dave,
  <BR><BR>I find a flat, smooth hard surface, such as the side of my =
pinning
  tool. &nbsp;I lay it on the keybed(or something else flat and close =
by) and
  gently push the pin up into the birdseye. &nbsp;Feeling the amount of =
pressure
  you have to apply to the piece to get the pin through(or not) can tell =
you how
  good the fit is. &nbsp;&nbsp;I always push directly over the pin to =
avoid any
  kind of unsupported stress on the part. &nbsp;I occasionally get a pin =
jabbing
  in the end of my thumb, but not often. <BR><BR>I also use the Mannino
  broaches. &nbsp;They are one of the best tools I've purchased based on =
money
  spent vs. money earned. &nbsp;The ends are REALLY sharp. &nbsp;DAMHIK. =

  <BR><BR>Dave Stahl <BR><BR>In a message dated 4/2/04 4:21:48 AM =
Pacific
  Standard Time, jrpiano@win.eastlink.ca writes: <BR><BR><BR>
  <BLOCKQUOTE
  style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #0000ff 2px =
solid; MARGIN-RIGHT: 0px"
  TYPE="CITE"><BR>I use the Mannino broaches themselves to determine =
the fit
    in the birdseye. <BR>They have handles and the size marked on them.
    <BR>Regards, <BR>John M. Ross <BR>Windsor, Nova Scotia, Canada
    <BR>jrpiano@win.eastlink.ca <BR>----- Original Message ----- =
<BR>From: "Dave
    Nereson" &lt;davner@kaosol.net&gt; <BR>To: &lt;pianotech@ptg.org&gt; =

    <BR>Sent: Friday, April 02, 2004 3:56 AM <BR>Subject: thumb =
protection when
    re-pinning <BR><BR><BR>&gt; &nbsp;&nbsp;&nbsp;&nbsp;When re-pinning =
more
    than, say, twenty action parts, my right thumb <BR>&gt; really gets =
poked,
    cut, and chewed-up from repeatedly trying the pin in <BR>the =
<BR>&gt;
    birdseye of each part being re-pinned to see if it's tight enough, =
then
    <BR>&gt; pushing it into both bushings on the flange, individually, =
to see
    if they <BR>&gt; need reaming, burnishing, or re-bushing, then after =

    reaming, trying the <BR>pin <BR>&gt; in the bushings again, maybe =
making
    another touch-up operation, then <BR>trying <BR>&gt; the pin in the =
bushings
    again, then pushing the pin through one bushing <BR>into <BR>&gt; =
the
    birdseye, and, finally, using the plunger-type re-pinning tool only =
<BR>for
    <BR>&gt; the final push through the birdseye. &nbsp;That's just one =
flange.
    &nbsp;After a <BR>&gt; couple dozen, my thumb is raw meat, as though =
I took
    a rasp to it. <BR>&gt; &nbsp;&nbsp;&nbsp;&nbsp;I've tried using a =
thimble,
    but you have to keep taking it off to try <BR>&gt; the pin in the =
bushing or
    to pick up a fine tool like a tiny reamer, <BR>&gt; tweezers, or =
center-pin,
    then put it back on to push the pin through. &nbsp;And <BR>&gt; with =
it on,
    you don't have the sensitivity or control for trying the fit <BR>of =
<BR>&gt;
    the pin in the bushing. &nbsp;Nor do you with pliers. &nbsp;Maybe =
some
    custom-made <BR>&gt; leather "thumb boot" through which a center-pin =
will
    NOT poke would work, <BR>&gt; but it would probably wear through =
quickly.
    &nbsp;I need a bionic thumb! <BR>&gt; &nbsp;&nbsp;&nbsp;&nbsp;Gang
    replacement is different, where you have all new flanges and you =
<BR>&gt;
    can chuck a roughened center pin in a drill and use that for the =
reamer,
    <BR>&gt; then just push all the same size pins through with the =
pinning
    tool. &nbsp;But <BR>&gt; that's not the case with most actions I =
work on.
    <BR>&gt; &nbsp;&nbsp;&nbsp;&nbsp;--David Nereson, RPT
<BR></BLOCKQUOTE><BR><BR></BLOCKQUOTE></FONT></FONT></BODY></HTML>