<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=US-ASCII">
<META content="MSHTML 6.00.2900.2769" name=GENERATOR></HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: =
Arial"
bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=rol=
e_document
face=Arial color=#000000 size=2>
<DIV>
<DIV>Ric,</DIV>
<DIV> </DIV>
<DIV>Taking them out is usually easier said than done when the springs are g=
lued
to the wippen. </DIV>
<DIV> </DIV>
<DIV>How does one lower the tension on the springs, provided they can be rem=
oved
without major mangling? Squash them? Replacing them seems like t=
he
way to go.</DIV>
<DIV> </DIV>
<DIV>Just wondering. I've been seeing lots of bobbling hammers
lately.</DIV>
<DIV> </DIV>
<DIV>Dave Stahl</DIV>
<DIV> </DIV>
<DIV>In a message dated 11/5/2005 3:48:05 P.M. Pacific Standard Time,
ricbrek@broadpark.no writes:</DIV>
<BLOCKQUOTE
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: blue 2px solid"><=
FONT
style="BACKGROUND-COLOR: transparent" face=Arial color=#000000 size=
=2>Hi
Marcel<BR><BR>You just have to take them out, lower there tension (or use
shorter <BR>springs if you like) and put them in again. Sounds like more w=
ork
then <BR>it really is. Action on the bench, bridle straps unhooked a=
nd
perhaps <BR>an hour doing the job. At least thats the way I do it. I=
never found a <BR>tool that let you do this with the springs in
place.<BR><BR>With good jack center pining, you dont need very much spring=
tension at <BR>all. Certainly not more then the hammer butt can easily
push (via the <BR>jack top) out of the way as
neccessary.<BR><BR>Cheers<BR>RicB</FONT></BLOCKQUOTE></DIV>
<DIV></DIV>
<DIV> </DIV></FONT></BODY></HTML>