<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1">
<title></title>
</head>
<body text="#000000" bgcolor="#ccccff">
<font face="Arial" size="2">Terry Farrell</font> wrote:<br>
<font face="Arial" size="2"> </font>
<blockquote type="cite"
cite="mid200503010400.j2140uK22393@bridget.rudoff.com">
<div><font face="Arial" size="2">I am in the process of repinning all
action centers on a set of wippens, and flanges on the back-action. I
like using the long Renner pinning wire. Unfortunately, in the range of
sizes I need to work with, Renner only offers wire in 0.05 millimeter
increments. This fairly closely compares to 0.002-inch increments. If I
use the Renner wire, and 1.30 mm wire (about 0.051-inch) is just a tad
too loose - it would be ideal to use 1.325 wire (which would be roughly
equal to a 0.052-inch), but unfortunately, Renner only offers their
wire in the next size increment at 1.35 mm.</font> <br>
</div>
<div><font face="Arial" size="2">My question is this - does jumping
up 0.05 mm (or 0.002-inch) significantly increase the risk of splitting
the birdseye? Obviously, if I used the regular little individual center
pins, I could limit the jump to 0.025 mm (0.001-inch). Is this a big
deal or what?</font></div>
<div> </div>
<div><font face="Arial" size="2">Terry Farrell</font></div>
</blockquote>
<br>
Terry - <br>
<br>
I carry the European center rods. Presently, I have over 20 sizes in
stock, in increments of .025 mm. <br>
1.325 mm is no problem. See the size comparison chart on my website:<br>
<a class="moz-txt-link-freetext" href="http://www.pianofortesupply.com/centerpinsizes.html">http://www.pianofortesupply.com/centerpinsizes.html</a><br>
<br>
Remember, if you are looking for any specialty item from Europe, I am
the one who can supply it to you. (Although I haven't branched out
into champagne yet.)<br>
<br>
Jurgen Goering<br>
Piano Forte Supply<br>
<br>
<img src="cid:part1.06070505.02000406@pianofortesupply.com" alt=""><br>
<font face="Arial" size="2"></font>
</body>
</html>