---------------------- multipart/alternative attachment In a message dated 11/4/01 12:45:35 PM Eastern Standard Time, nhunt@optonline.net writes: > > There is an easy solution. CA. But God help the poor schnook who has > to change the wires 18 years from now. > I agree with Newton about the CA - as I do about most of his wisdom. However, you don't need to worry about the CA holding the wires such that replacing them in the future will be a problem. A little heat on the wire will make the glue (almost any glue) let go. In the shop we use a heat gun, or one of those butane lighters whose flame emanates from the end of a long tube. Best regards, - Tom McNeil - Vermont Piano Restorations "Outside of a dog, a book is a man's best friend. Inside a dog it's too dark to read." - Groucho Marx ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/e5/f4/18/76/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC