Yep. Sufficient for a good start point to restoration function. Well said. Thanks Newton Fred Sturm wrote: > > Newton, > I'd put it that friction _is_ a factor, but only the friction between > capstan and wipp heel (and, to a lesser degree, between knuckle and rep > lever). What you are doing is looking for convergence - the compromise > where there is least rubbing between arcs of different radii. The old > string from key bottom balance hole to wipp center method will tell you > that (for heel to capstan), but you need a fair number of parts out of > the way. So fudging back and forth and measuring up and down weight is a > practical and efficient way of finding the relatively optimal point in > certain circumstances. When you find the point where the spread is > least, you've found the point of least friction between capstan and > heel. > Fred Sturm > University of New Mexico
This PTG archive page provided courtesy of Moy Piano Service, LLC