This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Just to bug you? <G> Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Wimblees@aol.com=20 To: caut@ptg.org=20 Sent: Tuesday, August 19, 2003 6:12 PM Subject: Re: damper problem, solution Thanks to those who gave some advice.=20 The problem is in the agraff section of the trichords. I discovered = that the problem was not so much string leveling, but string spacing, as = Mary suggested. But instead of working with the dampers, I put a screw = driver between the agraff of the adjacent string and the right string = that was ringing, and twisted the screw driver. This brought the right = string closer to the middle. That solved the problem.=20 It is still a mystery why the right string kept ringing only with the = shift engaged. During normal playing all three strings are activated by = the hammer. And with the shift only the middle and right strings ring. = So why is only the right string ringing? Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/00/bb/16/f6/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC