Mark, you have forced my hand. In the vernacular, it was called a "p--s pump", unmentionable in polite society. This information, however, does not assist one in obtaining the afore-mentioned bladder pack. In actuality, they were probably much smaller than I described, but clawing one's way up a smoking mountainside has one the effect of inflating bladder and weight in memory. As I recall, one could cover a good bit of ground between re-fills, but surveying the distance between present position and water supply, and calculating effort expended to traverse said distance, had a positive outcome economy of water use. Otto ----- Original Message ----- From: "Mark Cramer" <Cramer@BrandonU.CA> To: "College and University Technicians" <caut@ptg.org> Sent: Tuesday, August 19, 2003 5:01 PM Subject: RE: filling Dampp-Chasers > Good one Fred. > > A former student-assistant here found a portable shower-head with a short > hose, and a rubber thing that fits over faucets on the other end. > > It worked just fine, until the janitorial head who spawned the idea by > refusing to grant us keys for four years running, retired and put an end to > all our ingenious fun. :>) > > Anyone progress with ideas for porting the water from room to room? > > Until Otto divulges the authentic "fire-fighters nickname" for the back-pack > unit he described in Dallas, we're doomed to toting a 10 gallon garbage can > up and down hallways on a 4-wheeled cart. > > best regards, > Mark Cramer, > Brandon University > > > -----Original Message----- > From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org]On Behalf Of > Fred Sturm > Sent: Tuesday, August 19, 2003 5:30 PM > To: caut@ptg.org > Subject: filling Dampp-Chasers > > > Keeping a bunch of Dampp-Chaser systems filled is a bit of a task. It's > nice to use a large tank of some sort, but getting water into the tank from > an available faucet can be a challenge. A key (or access) to the janitors > closet can help, but it is often far away from the systems needing water. > I just came up with a solution to this problem that fit my budget (didn't > cost a red cent): an old bicycle innertube (the smaller, "English" style, > as opposed to fat, "mountain bike"). One cut, and it turns into a hose that > fits over a faucet quite nicely. Innertubes do have a white powder > (probably talc) inside, so need to be flushed. But it saved me a few > minutes this morning. > Regards, > Fred Sturm > University of New Mexico > PS Best to avoid modern innertubes filled with "Slime" (a green substance > used to stop flats). I'm not sure you could flush that stuff out. > _______________________________________________ > caut list info: https://www.moypiano.com/resources/#archives > > _______________________________________________ > caut list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC