---------------------- multipart/alternative attachment Japanese pull saw. from bill Spurlock. Regards Roger At 11:57 AM 2/19/2004, you wrote: >I used to saw off the ends of shanks with a Dremel saw. But Dremel >discontinued making them. (I guess too many people trying to stop the saw >with their fingers, and suing Dremel because it cut off their fingers.) > >For a while I was taking the hammers and shanks off, and trimming the >tails with a band saw. But lately I've been using a Heavy Duty Cutt-Off >Wheel, no. 420 from Dremel. I just did a set, and it worked OK, except >that it burns the wood, which creates a bad smell, and I used 6 wheels. > >Does anyone else have a way to trim the tails, other than using a band saw? > >Wim >Willem Blees, RPT >Piano tuner/technician >School of Music >University of Alabama ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/dc/04/9e/ac/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC