---------------------- multipart/alternative attachment Hi Wim, It might seem a bit old fashioned and technologically challenged, but=20 you'd be surprised how fast an Exacto Razor Saw works. Jeff On Thursday, February 19, 2004, at 12:57 PM, Wimblees@aol.com wrote: > I used to saw off the ends of shanks with a Dremel saw. But Dremel=20 > discontinued making them. (I guess too many people trying to stop the=20= > saw with their fingers, and suing Dremel because it cut off their=20 > fingers.) > =A0 > For a while I was taking the hammers and shanks off, and trimming the=20= > tails with a band saw. But lately I've been using a Heavy Duty=20 > Cutt-Off Wheel, no. 420 from Dremel. I just did a set,=A0 and it = worked=20 > OK, except that it burns the wood, which creates a bad smell, and=A0I=20= > used=A06 wheels. > =A0 > Does anyone else have a way to trim the tails, other than using a band=20= > saw? > =A0 > Wim > Willem Blees, RPT > Piano tuner/technician > School of Music > University of Alabama ---------------------- multipart/alternative attachment A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 986 bytes Desc: not available Url : https://www.moypiano.com/ptg/caut.php/attachments/a4/a8/2a/3a/attachment.bin ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC