Don, We are talking D actions here, right? Well, as a matter of fact, I probably couldn't reach in at that angle and it would have to be a pretty long screwdriver! I suppose I could put out $350 for one of those grand action carts so I didn't always have to make sure there was a table nearby........ Anyway, speaking of D actions, I just finished rebuilding one and after getting used to giving the heave-ho to pull it out, I went and pulled on a B action with such gusto that it (and I) practically ended up on the floor. Barbara Richmond PS Are you teasing on me? ----- Original Message ----- From: "Don" <pianotuna@yahoo.com> To: "College and University Technicians" <caut@ptg.org> Sent: Monday, March 21, 2005 10:08 PM Subject: Re: [CAUT] D complimented > Hi Barbara, > > You can't reach in with a screw driver? hmmmmm Or you can't drill a pilot > hole for a screw? hmmmmmmmmmmmmmmm! > > At 09:53 PM 3/21/2005 -0600, you wrote: >> ;-) Barbara Richmond, just a little taller than a D action >>standing on end........ > Regards, > Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. > Non calor sed umor est qui nobis incommodat > > mailto:pianotuna@yahoo.com http://us.geocities.com/drpt1948/ > > 3004 Grant Rd. REGINA, SK, S4S 5G7 > 306-352-3620 or 1-888-29t-uner > > _______________________________________________ > caut list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC