---------------------- multipart/alternative attachment In a message dated 3/23/05 10:04:31 P.M. Central Standard Time, roger.j@sasktel.net writes: Hi Vince, Use a small drill bit in a pin vice. A little hard on the fingers but worth the effort. Make sure you have a nice sharp drill bit. The nice thing about Robertson screws, is that they are self grip, and easy to get in under th e lip of the Dag. At least some one is really paying attention ;-) Regards Roger This might be a "duh" question, but how do you attach the dag to the keybed? If it attached by a screw, wouldn't it be easier remove the dag, install the set screw, and then put it back? Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/1f/f4/c2/98/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC