MessageWould a little double sided sticky masking tape help? Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: lafargue at bellsouth.net To: caut at ptg.org Sent: Monday, August 28, 2006 7:12 AM Subject: [CAUT] lid install I have a Bosendorfer customer needing a new lid. When it arrives, it must be "fitted". I was wondering if anyone has experience with this. The lid must be aligned to the lock, then marked for screw locations for the hinges. How does one go about accurately doing this? I also have an old Baldwin needing new hinges (exact original dimensions not available) and I need to do basically the same thing. Thanks in advance. Lance Lafargue, RPT LAFARGUE PIANOS, LTD New Orleans Chapter, PTG 985.72P.IANO lafargue at bellsouth.net www.lpianos.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20060828/09b168ce/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC