Both mortises that hold the front rail of a S&S grand have been damages, and the slot is now too big for the screw. What are some ways to hold the rail on the piano? Two option I am considering is drilling a hole through the front of the rail and attaching the rail to the cheek block. The other option is to attach the rail with screws from the bottom, like the way a lot of other grands have. The piano is in a practice room, so cosmetics is not important. Wim -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20060308/215612a2/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC