Does the ones you've glued with Bolduc glue also move the same way the ones you did previously with hide glue? David Love davidlovepianos at comcast.net -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Jon Page Sent: Monday, March 27, 2006 6:20 PM To: caut at ptg.org Subject: [CAUT] Hammer Alignment >Do they always end up twisting in the same direction? yes >One thought is that if you burn the shanks for straightening at the initial installation and >you hold the heat gun, say, in your right hand, you might be heating one side of >the shank more than the other which might create some unequal tension in the >shank that might play out over the period of a few weeks or months. Burning-in is done with an alcohol flame from underneath the shank. There are never many needing this at installation. And why doesn't the bass twist??? -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20060327/b0f21c39/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC