Hey David, I usually cut the lead wire about 1/8 inch too long then one tap with a small hammer swedges/compresses the lead level with the wood. I've never had one come out. (Maybe I'm not understanding the thread...) Jim Busby BYU ________________________________ From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of David Ilvedson Sent: Tuesday, September 05, 2006 11:11 AM To: pianotech at ptg.org; caut at ptg.org Subject: [CAUT] arbor press Where the heck do you find a small arbor press for lead in hammers? I'm not having any luck in my area...all 1 ton+ David Ilvedson, RPT Pacifica, CA 94044 -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20060905/5171ea3e/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC