[CAUT] Black on Black... (Jack alignment)

[Don Mannino]

Jim,
 
For the new carbon actions, there is white paint on the back edge of the
jacks.  For older ones, you could apply some in the same manner, yes.
Testors white enamel and a fine brush works.
 
Don


  _____  

	From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On
Behalf Of Jim Busby
	Sent: Saturday, August 04, 2007 6:21 PM
	To: College and University Technicians
	Subject: [CAUT] Black on Black... (Jack alignment)
	
	

	List, Don...

	 

	Help! Do any of you have a trick for seeing the new Kawai parts,
namely for doing the jack to knuckle alignment? I truly can't see the
black parts/plane of the jack. (My eyes are bad, but this is way worse
for me) I've got some good lights and such, but it's still difficult.
I've been tempted to paint white-out on the backs of the jacks... Love
the parts, but these old eyes don't get it done anymore.

	 

	Any tricks out there? Am I the only one experiencing this?

	 

	Thanks,

	Jim Busby BYU

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20070808/713e5204/attachment.html